-
Composition and Properties
-
GEMSTRIP V is a low toxicity environmentally friendly
lubricant for vinyl sign material.
-
It is formulated to allow positioning of adhesive
backed vinyl used in sign manufacture.
-
It is low toxicity.
-
Physical properties
-
Appearance: clear liquid
-
Odour: low
-
Flammability: flammable
-
Method of Application
-
GEMSTRIP V should be applied by brush or roller to the a
clean substrate on to which the sign is to be glued.
-
The adhesive backing is then removed from the vinyl used
to make the sign and it placed on the surface treated with GEMSTRIP V as
soon as possible.
-
The sign material can then be moved around the surface
until in the correct position.
-
Typically there are up to 30 minutes to do this but time
will vary depending on ambient temperature and humidity.
-
Handling Precautions
-
Avoid contact with eyes and skin.
-
Do not ingest.
-
In confined spaces or poorly ventilated areas use a
respiratory mask with an organic vapour cartridge.
-
GEMSTRIP V is flammable so avoid sparks ,flame, heat.
The information provided is accurate to the
best of our knowledge. We can not however anticipate all conditions under
which this information and our products may be used. We therefore accept
no responsibility for results obtained by the application of our products,
or for their safe use and suitability. GemCo Limited sells these products
without warranty and buyers and users assume all responsibility and
liability for loss or damage arising from the handling and use of our
products.
|
