Epoxy adhesive for general purpose use
GEMSTICK GP is a general purpose 1:1 mix ratio epoxy adhesive available in a resin or paste (for vertical surfaces). It has been used in many different applications including bonding dissimilar materials. It has a 1:1 mix ratio, is flexible, and adheres well to many plastics (consult GemCo Ltd). It has been used by hobbyists , crafts , wood turners, boat builders, flooring contractors etc.
Download 5.150 GEMSTICK GP Product Sheet
Physical properties
- Appearance: Base - high viscosity liquid Hardener - high viscosity liquid
- Odour: low odour Solids: 100%
- Adhesive Type: Epoxy
- Packaging: Small packs: 1,2,8 20 litre kits ; large packs 200 litre drums
- Mix ratio: 1:1
- Pot Life: Approximately 1 hr @ 20 degrees Celsius Cure:
- Typically overnight - will vary according to temperature.
Surface Preparation
- All oil, grease , loose material ,and other contaminants must be removed.
Method of Application
- Add 1 part hardener to 1 part base and thoroughly power mix.
- GEMSTICK GP is applied by spatula or similar.
- Cure normally overnight but will vary depending on temperature & humidity..
Handling Precautions
- Avoid contact with eyes and skin.
- Do not ingest.
- Use with adequate ventilation.
- Protective clothing, eye protection, and gloves should be worn.
- Do not breathe vapour or spray.
- Keep away from children.
The information provided is accurate to the best of our knowledge. We can not however anticipate all conditions under which this information and our products may be used. We therefore accept no responsibility for results obtained by the application of our products, or for their safe use and suitability. GemCo Limited sells these products without warranty and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of our products.

