Water based sacrificial anti-graffiti coating

GEMCOAT SAG is a clear water based environmentally friendly based sacrificial anti graffiti coating which can be applied over most painted and unpainted surfaces to protect them from graffiti attack. It can also be used as a release agent for glues, resins, paint etc. It is formulated to allow removal of common forms of graffiti from surfaces painted with GEMCOAT SAG. This includes aerosol paints such as enamels and fluorescent lacquers,and felt tip inks. It functions by allowing a small portion of the coating to be removed with the graffiti. The area cleaned of graffiti is then recoated with GEMCOAT SAG. To remove graffiti with minimal damage to the coating GEMSTRIP GA graffiti remover is recommended. GEMCOAT SAG will remain effective , if not removed, for up to 10 years when correctly applied to properly prepared surfaces.

Download 4.130 GEMCOAT SAG Product Sheet

Physical properties

• Appearance: white liquid
• Odour: low odour
• Flammability: non flammable
• Packaging 5l, & 20L jerrycans, 200l drums

Method of Application

• Apply two coats of GEMCOAT SAG by spray , roller, or brush.
• Allow to dry between coats before reapplying. In winter allow 24 hours between coats.
• Do apply when raining or temperatures are below 10 ° C

Handling Precautions

• Avoid skin & eye contact.
• Avoid inhalation of spray droplets.
• Keep away from children.