Welcome to GemCo Ltd, you can login or create an account.

PLEASE NOTE: GemCo will close for Christmas/New Year break on 20th Dec and re-open 14th Jan 2019.
E Commerce orders received after 17th December will not be processed until 16th Jan 2019.

SafetyCrete Dairy Shed Repair Mortar

Epoxy adhesive - fast cure (Patent Pending)

7.112 GEMSTICK FC II
Price Incl. GST
Select Kit Size: 

Qty:  Buy Now
   - OR -   
Epoxy adhesive - fast cure (Patent Pending)

GEMSTICK FC II is a solvent free 2 part fast set adhesive suitable for small hand mixes or for gun application. It is formulated for gluing wood , metal, concrete, fibreglass , and some plastics. It is normally tack free after 2-10 min cure (>1mm thickness) depending on ambient temperature. It will cure at low temperatures, has a convenient 1:1 mix ratio , and low odour. It is supplied as a liquid or paste. It has been used by hobbyists, crafts, wood turners, boat builders, flooring contractors etc.

Download 7.112 GEMSTICK FC II Product Sheet

Physical properties

  • Appearance: Part A(Base) clear liquid or gel ; Part B(Hardener) - clear liquid or gel
  • Odour: low Solids: 100%
  • Coating Type: Epoxy Packaging: Gel – 2L kits Mix ratio: 1:1
  • Pot Life @ 25°C: 2 min (19 gram mix)
  • Coverage: 5 square metre/litre @ 200 mic thickness (theoretical - depends on substrate)
  • Cure tack free @ 25°C: 2-10 min (>1 mm thickness); 20 – 60 min < 1mm thickness.
  • Will vary according to temperature & amount mixed
  • Hard cure @ 25°C: 24 hours - will vary according to temperature & amount mixed.
  • Can be handled earlier than this.
  • Compressive Strength 10,000 psi (typical) - will vary in practice
  • Adhesive Tensile Strength 2000 p.s.i. (typical) - will vary in practice
  • Shore D Hardness 80 (typical) - will vary in practice

Surface Preparation

  • All oil, grease , loose material ,and other contaminants must be removed.
  • Consult GemCo before gluing non ferrous metals & plastics.

Method of Application

  • GEMSTICK FC II 1:1 can be hand mixed in small quantities or applied by gun through a disposable static mixer attached to a gun.
  • GEMSTICK FC II 1:1 will be slightly rubbery in the early stages of cure.
  • GEMSTICK FC II 1:1 can be over coated with most adhesives, or coatings providing it is thoroughly sanded.

Handling Precautions

  • Avoid contact with eyes and skin.
  • Do not ingest.
  • Use with adequate ventilation.
  • Protective clothing, eye protection, and gloves should be worn.
  • Do not breathe vapour or spray.
  • Keep away from children.

 

The information provided is accurate to the best of our knowledge. We can not however anticipate all conditions under which this information and our products may be used. We therefore accept no responsibility for results obtained by the application of our products, or  for their safe use  and suitability. GemCo Limited sells these products without warranty and buyers  and users assume  all  responsibility and liability for loss or damage arising from the handling  and use of our products.

 

The information provided is accurate to the best of our knowledge. We can not however anticipate all conditions under which this information and our products may be used. We therefore accept no responsibility for results obtained by the application of our products, or  for their safe use  and suitability. GemCo Limited sells these products without warranty and buyers  and users assume  all  responsibility and liability for loss or damage arising from the handling  and use of our products.

500ml Kit